Alumiininen tukimestari

Muovinen pääkierros , magneettinen taustalevy , metallinen pää- ja alumiinikierros timantilla päällystetylle tasaisen levyn hiomapyörälle, se on vain koneen lisävaruste.Suosittelemme alumiinisen ja muovisen pääkierroksen käyttämistä paineherkällä liimalla timanttitasolla , Metal Master Lap -sarja, jota käytetään upealla timanttipinnoitetulla Flat Lap Disk -levyllä. Kaikissa timanttirenkaissamme on 1/2 "arbor-reikä ja ne on tarkoitettu kiinnitettäviksi mekaanisesti Master Lapiin.

6"x1/2" Precision Master Laps

US$12-30

The ground flat and parallel Master Support Plate laps ,Its used as a base plate for other laps. 1/4"  thick and are not charged with abrasive. 

8"x1/2" Precision Master Laps

US$22-46

​The ground flat and parallel Master Support Plate laps ,Its used as a base plate for other laps. 1/4"  thick and are not charged with abrasive. 

6"x1/2" Economical Aluminum Master Laps

US$22-46

The ground flat and parallel Aluminum Master laps ,Its used as a base plate for other laps. 1/4" thick and are not charged with abrasive. Our master lap made with the aluminum and plastic materials,It is a lightweight backing used in conjunction with diamond flat laps an disc. The standard sized backing is available to support both 6 and 8 standard discs

8"x1/2" Economical Aluminum Master Laps

US$22-46

The ground flat and parallel Aluminum Master laps​ ,Its used as a base plate for other laps. 1/4" thick and are not charged with abrasive. Our master lap made with the aluminum and plastic materials,It is a lightweight backing used in conjunction with diamond flat laps an disc. The standard sized backing is available to support both 6 and 8 standard discs

6"x1/2" Plastic Master Lap

US$3-10

Plastic Master Laps is a base lap used as a support. This uncharged plastic lap is used as a base for other laps such as Ultralaps and Lop Tops. Precisely ground flat and parallel with 1/2" arbor hole. Approximately 1⁄4" thick.

6" 1/4"-20 Screwback Master Support Lap

US$3-10

The Precision ground flat and parallel Screwback Master laps ,Its used as a base plate for other laps. 1/4" thick and are not charged with abrasive. The Lap is ground flat and parallel and is used as a base plate for other laps. The ground flat and parallel Lap.It is used as a base plate for other laps. Master Lap is 1/4" thick and are not charged with abrasive in 1/4"-20 right thread.

8" 1/4"-20 Screwback Master Support Lap

US$3-10

The Precision ground flat and parallel Screwback Master laps ,Its used as a base plate for other laps. 1/4" thick and are not charged with abrasive. The Lap is ground flat and parallel and is used as a base plate for other laps. The ground flat and parallel Lap.It is used as a base plate for other laps. Master Lap is 1/4" thick and are not charged with abrasive in 1/4"-20 right thread.

1 / 1

Please reload