Timanttihiomakoneen kärki

Hansilla on tällä hetkellä käytetyimmät ja suosituimmat timanttihiomakoneen kärjet . Terä sopii kaikille hiomakoneille, lasin nopeaan poistamiseen ja suurille alueille, joissa on vain vähän haketusta. Timanttihiomakoneiden terät ovat eri rakeita työskenneltäessä erilaisilla lasivalikoimilla. Erittäin hieno tai hieno hiomakone sopii parhaiten peili-, antiikki- tai dikroikkilasille niiden herkän luonteen vuoksi. Hienot rakeet soveltuvat erinomaisesti fuusiokappaleiden reunoihin ja eliminoivat käytännössä kaiken hakkeen. Karkeammat hiomakoneet vakiomalliset tai tavalliset hiomakoneet muotoilevat lasin nopeasti ja tehokkaasti. Karkeammat bitit maksimoivat puremisen ja tarjoavat samalla tasaisen jauhatuksen. Diamond Grinder Bits on teräsalusta ja kromi karkaistu suorituskyvyn, lujuuden ja kestävyyden takaamiseksi. Laadukkaita timanttihiomakoneita käytetään sähkökoneen, jalokivien, lasin ja niin edelleen hiontaan tai kaiverrukseen. Lasimaalaustarvikkeidesi valikoima hiomakoneita mahdollistaa nopean, aggressiivisen jauhamisen ja lopputuotteen herkän viimeistelyn.Voimme toimittaa kaiken tyyppiset timanttihiomakoneen kärjet Glastarille, Inlandille, Gryphonille ja muille tuotenimille. Nämä palat liukuvat akselin yläosan yli kaikilla sisämaahan, Glastarilla, Gryphonilla ja punaisilla Diamond Techgrindereilla.

Katso muut ilmoituksemme.

Asiasanat: hiontapää, hiomapäät, mosaiikkipihdit, lasileikkurit, peililaatat, mosaiikkileikkuri, lasin leikkaukset, juoksupihdit, lyijyvalaistus, työkalut, lasimaalaus, lasimaalaus, lyijytikku, lyijypuristin, lyijytyökalut, mosaiikkityökalut, lasi leikkaustyökalut, lasin hiontaterät, lasimylly

1/4" Diamond Stained Glass Lapidary Grinder Adapter Head Bit

Made with a patented diamond bonding process for extra long life. Fits Glastar G5, G6, and G8 grinders for grinding small, tight areas. Fits Inland and Glastar G7 grinders with bit adapter. For extra control and support when grinding with this bit use the Glastar Universal Mini Table.

1" Diamond Stained Glass Lapidary Grinder Fast Head Bit

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

1" Diamond Stained Glass Lapidary Grinder Standard Head Bit

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

3/4" Diamond Stained Glass Lapidary Grinder Standard Head Bit

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

5/8" High Diamond Stained Glass Lapidary Glass Grinder Head Bit Adapter

Description The easy way to drill precision holes and create fine details without having to remove your ¾" or 1" grinding head!300 Series Adapter, Inland no. 40317 is required to use individual drilling drums Fits .312" (7.92 mm) arbor TIR <.0025" (.0635 mm).

  • Required for use with 1/8" (3 mm) , 1/4" (6mm), and 3/8" (10mm) drilling bits.

  • Standard 100 Grit for multi-task use.

  • Works right on top of larger diamond drums, no need to change or remove your ¾" or 1" drum before using.

  • The brass cores are manufactured on "Swiss precision" machinery for consistent and accurate tolerances.

  • Measured for true before the diamond is applied, so they spin properly on the motor shaft.

Diamond Stained Glass Lapidary Grinder Jewelry Groove Head Bits

Use the Groove Edge to create a groove around the outside of fused glass pieces, beads, stones, cabochons and more. Diamond Groove Jewelry Grinder Bit is used for shaping and grinding the edges of glass pieces and creating grooves in stained glass for wire wrapping. If you're a glass artist, these grinder bits are essential. We have a large variety of different grits available in sizes. All grinder bits are 1.4mm in thickness and come with a set-screw Allen wrench and square-shaped sponge to keep your glass piece cool while you work.

1" Diamond Stained Glass Lapidary Grinder Radius Angle Head Bits

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

3/4" Diamond Stained Glass Lapidary Grinder Radius Angle Head Bits

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

1" Diamond Stained Glass Lapidary Grinder Radius Edger Head Bit

This Diamond Glass Grinder Radius Edger Bit head combines a flat and radius (rounded) edger. Select this for mosaics or when working with exposed glass edges. Use the fine grit radius head to virtually eliminate chipping on decorative mirror edging. Standard 100 grit. Made with a patented diamond bonding process for extra long life. Fits Glastar G3, G4, G7, G12, G14 and all Inland Grinders.

1" Diamond Stained Glass Lapidary Grinder Reducing Head Bit

The grooved shape of the 1" Diamond Glass Grinder Reducing Bit tapers the glass edges and removes any irregularities in thickness. Especially useful when working with ripple or textured glass. A smooth and even edge is important for proper foil fit. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5 and G-8.

1" Diamond Stained Glass Lapidary Grinder Ripple Head Bit

The Diamond Ripple Grinder Head is a combination head with a tapered channel for heavily textured glass. It to fit fused glass pieces into leadlight panels,can also be used in copper foiling to fit foiled glass into lead or zinc came.This ripple bit features a rippled edge coated with Popular grit industrial diamond. Use the multiple thicknesses of these edges to create attractive contours and textures in materials such as stone, marble, tile, glass and metal. Secure this bit with a set-screw on the side; an Allen wrench is included for this task.

1 / 1

Please reload